An industry standard sheet metal which is available with specific surface ranging from below 125 m²/m³ for high capacity to more than 750 m²/m³ for high efficiency applications. The standard angle of the corrugations which is 45°[referred M1] and 60°[referred M2] also high capacity structured packing [referred MH] are fabricated in PANTAN. Metal Structured Packing provides high capacity, low pressure drop and good wettability in many process columns.
Features
- Ideal for vacuum services
- Very low liquid loads (< 100 L/m²h) are possible
- Low pressure drop per theoretical stage
- High separation efficiency owing to larger mass transfer area
- Good wettability of the packing surfaces
- Superior compressive strength
"PS" Series Properties
Panta-Pak | Surface Area(m²/m³) | Corrugation Angle | Relative HETP |
PS-125M1 | 125 | 45˚ | 2.05 |
PS-125M2 | 125 | 60˚ | 4.05 |
PS-165M1 | 165 | 45˚ | 1.5 |
PS-165M2 | 165 | 60˚ | 2.35 |
PS-175M1 | 175 | 45˚ | 1.25 |
PS-175M2 | 175 | 60˚ | 1.85 |
PS-225M1 | 225 | 45˚ | 1.1 |
PS-225M2 | 225 | 60˚ | 1.65 |
PS-250M1 | 250 | 45˚ | 1 |
PS-250M2 | 250 | 60˚ | 1.55 |
PS-250MH | 250 | 45˚ | 1 |
PS-300M1 | 300 | 45˚ | 0.9 |
PS-300M2 | 300 | 60˚ | 1.2 |
PS-500M1 | 500 | 45˚ | 0.7 |
PS-500M2 | 500 | 60˚ | 0.9 |