Liquid Distributor Model DD-132

To acquire the maximum efficiency in packed column, liquid should be distributed uniformly over the packed bed.Therefore, Liquid Distributors are used above each bed of packing.Good practice designed distributors have following specifications:

  • Uniform liquid distribution
  • Operation flexibility through the turn down range
  • Low vapor pressure drop
  • Low liquid residence time
  • Capability to be used as combined with collector for re-distribution
  • Minimum distributor height
  • Fouling resistance
  • Cross mixing capability

Properties Table of Distributor Model ِD-132


Type

Drip Tube Deck Distributor

Diameter

>1000 mm

Liquid Range

0.8 – 30 m³/hm²

Resistance to Fouling

Medium

Turndown Ratio

2 :1 (10:1 max in multiple levels holes)

Holes Position

Square pattern punched in the trough side which is covered with drip tubes (Multiple levels & series of holes can be punched to achieve high turndown ratio)

Drip points Density

80-200 Drip points /m²

Optional Features

Combined with Hat to Operate as Re-distributor