Liquid Distributor Model TD-111

To acquire the maximum efficiency in packed column, liquid should be distributed uniformly over the packed bed.Therefore, Liquid Distributors are used above each bed of packing.Good practice designed distributors have following specifications:

  • Uniform liquid distribution
  • Operation flexibility through the turn down range
  • Low vapor pressure drop
  • Low liquid residence time
  • Capability to be used as combined with collector for re-distribution
  • Minimum distributor height
  • Fouling resistance
  • Cross mixing capability

Properties Table of Distributor Model TD-111


Type Drip Tube Trough Distributor
Diameter >1000 mm
Irrigation Rate 0.8 – 30 m³/hm²
Resistance to Fouling High
Turndown Ratio 2:1 (maximum 10:1 in multiple level holes)
Holes Position Square pattern punched in the trough’s side which is covered with drip tubes (Multiple levels & series of holes can be punched to achieve high turndown ratio)
Drip points Density 80 - 100 drip points/m²