Vane Pack

Panta Vane™ Mist Eliminator consists of a series of specially profiled baffles that removes liquid droplets from vapor stream by the inertial impaction of the droplets on the baffles. The liquid droplets carry over with vapor which has been crossing vane zigzag do not intend to change direction, so collide to lates and forming larger droplets which trickle downward to the liquid in the bottom of separator drum.

Specifications of types of Panta Vane™ are as below:
  • Simple vertical flow vane (VC0 Series)
  • Single pocket horizontal flow vane (HZ1 Series)
  • Double pocket horizontal flow vane (HZ2 Series)
Vane Pack

Specifications of some popular types of mesh pads which are used in most processes are listed in the below table:
Panta Vane™ Type Drainage Channel Vane Pitch Fouling Resistance  
VC0-225 None 25 Good Vane Pack VC0
VC0-325 None 25 Good
VC0-425 None 25 Good
HZ1-225 Open 25 Reasonable
HZ1-325 Open 25 Reasonable Vane Pack HZ1
HZ1-425 Open 25 Reasonable
HZ1-220 Open 20 Reasonable
HZ1-320 Open 20 Reasonable
HZ1-420 Open 20 Reasonable Vane Pack HZ2
HZ2-220 Enclosed 20 Avoid
HZ2-320 Enclosed 20 Avoid
HZ2-420 Enclosed 20 Avoid

Droplet removal is by inertial impaction. When the gas is forced to change direction negotiating narrow passages formed by the shape of the vanes, larger liquid droplets will tend to continue in a straight line and coalesce on the vane surface that blocks their path. Smaller droplets however will tend to follow the gas around the corner. The degree of removal of any droplet size can be calculated based on centrifugal forces and Stokes Law.

In general droplet removal efficiency increases with:
  • Increasing Gas Velocity
  • Increasing Gas and Liquid density difference
  • Decreasing Gas Viscosity
  • Increasing Vane Angle
  • Decreasing Vane Pitch